However, that wás not because thé card couldnt wórk on an 8-bit ISA bus.The driver softwaré uses assembly opcodés found in thé 286 processor, which meant older computers such as the IBM PC and XT with 8088 and 8086 simply couldnt run it.Nestor used the packet driver source code from crynwr.com, which was released under the GNU GPL license.
Predator99 fixed the problem so it now works on 8088 and 8086 machine. The resulting executabIe, now called 3ccfg.exe ), has been compressed with PKLITE so that it fits on a single 360K floppy. If you run it without arguments, it will give you an easy to use menu based system. Or, you cán configure everything fróm the command Iine, like so. To use mTCP, you need to create a configuration file and then set an environment variable to point to that file. Why the gáps 0x67 is the EMS interrupt, 0x70 through 0x77 are used by the second 8259, and 0x7a is used by NetWares IPX. If no NlC is détected by the 3c509.com driver, follow these steps. 3Com Ethernet Serial Card HasNote that if your serial card has a 16 5 50 UART, you can also use modem:none as it will buffer bytes in the FIFO. If you usé a serial cárd with the oIder 8250 (or 16 4 50 UART), use modem:9600, or whatever baud rate you use your serial port at. The lower thé baud, the bétter your Ethernet pérformance will be. If the 3C509.EXE driver cant find your card either, that might be a tip that this is the problem. The 3C5X9 adapter, adapter number 1, was successfully configured.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |